Considering that we do not live in the warmest climate and the cold season does not take us three months, but at least twice as long, then the issue of heating and heat preservation, given the cost of the latter, is quite acute. And in order to keep our house warm, it is necessary to insulate it from top to bottom, roof, walls and foundation.Thermal insulation properties of foam for insulation of the walls of the house, foam is well suited. This is a very light material, and when using it there is no need to strengthen the construction of the foundation and walls. The thickness of the foam sheets varies on average from 2 to 10 centimeters, they can also have different densities. The higher the density and thickness of the sheet, the better the insulation properties will be, respectively. The foam does not let in air, due to this, it is not cold in the house insulated with it in winter, and it is not hot in summer. Together with the air, it also does not pass steam, so it is worth taking care of good ventilation when using this type of insulation. But do not forget that no matter how thick and dense the foam is, it does not interfere with the sound at all.Foam installation technology When installing foam, the walls must be strong, dry, without falling off elements, the material of the walls does not matter, whether it is concrete, wood, brick, etc., it is desirable only that they are smooth. It is desirable to carry out insulation work in dry, warm weather, but if this is no longer possible, then you need to make an air pocket out of a plastic film and work in it, feeding heated air.When gluing foam onto flat walls, you need to apply a special glue to them with a toothed spatula and attach a foam plate on top. On uneven walls, the foam is simply smeared in the middle, along the edges and also attached to the wall. It is also necessary to glue the foam plates themselves together with the same glue, smearing their edges and connecting them. After the foam is glued to the wall with a puncher, dowels with hats and umbrellas need to fix it, at the corners of the plate and in the middle of one dowel.The insulation of the house is finished with this, now you can start finishing it, for this, a reinforcing mesh is glued on top of the foam with a special glue, on which a layer of plaster is applied, leveled and painted. For finishing the facade, you can also choose many other elements. You can find rea money pokies apps real money pokies app Australina mobile real money casinos
